-
-
-
-
-
Services and Support
-
Product Name:
Hydraulic Control Valve
Industry:
Precision parts
Materials:
7075 Aluminum Alloy
Quality Level:
◆ Parts are machined in just 25 minutes; ◆ Key feature tolerances include: cylindrical accuracy of holes <3 μm, concentricity of stepped holes <10 μm, and perpendicularity between holes and surfaces <15 μm; ◆ The mass production process is consistently stable, achieving a product yield exceeding 99%.
Product Name:
Propeller
Industry:
Precision parts
Materials:
Aluminum alloy
Quality Level:
The blades have poor rigidity; when cutting forces are applied at the tip of the blade span, they easily undergo elastic deformation, often accompanied by vibrations. To address this issue, a method was adopted—injecting construction-grade adhesive between the blade passages—which effectively altered the damping characteristics of the component.
Product Name:
Turbocharger impeller
Industry:
Precision parts
Materials:
2618 Aluminum Alloy
Quality Level:
◆ Efficient roughing and finishing of all features in a single clamping operation; ◆ Single-piece machining time is 5 minutes, with uniform tool marks on curved surfaces and a surface roughness of Ra < 0.8 μm; ◆ The batch production process is consistently stable, achieving a product yield rate exceeding 99%.
Product Name:
Hydraulic pump parts
Industry:
Precision parts
Materials:
Aluminum alloy
Quality Level:
Precision-cast blanks place extremely high demands on the machining cycle, with hole machining cylindricity held within a tight tolerance of 0.002 mm.
Product Name:
Fully milled bone plate
Industry:
Healthcare industry
Materials:
TC4 Titanium Alloy
Quality Level:
1. Efficient roughing and finishing of all features in a single clamping operation; 2. Single-piece machining takes 3 hours and 18 minutes, with uniform tool marks on the curved surfaces and a surface roughness of Ra 0.8 μm; 3. The batch production process is consistently stable, achieving a product yield rate exceeding 98%.
Product Name:
Human body joints
Industry:
Healthcare industry
Materials:
Cobalt-chromium-molybdenum alloy
Quality Level:
The joint surface is precisely ground in one pass, achieving a surface roughness of Ra < 0.6 μm.
Product Name:
Human pelvic bone
Industry:
Healthcare industry
Materials:
Aluminum alloy
Quality Level:
The surface must be smooth and free of tool marks, with overall surface accuracy held within ±0.01 mm—there are extremely high demands on product consistency.
Product Name:
Femoral Condyle Prosthesis
Industry:
Healthcare industry
Materials:
Cobalt-chromium-molybdenum
Quality Level:
This component is used in total knee replacement surgery. Its key machining features include the articular surface, intercondylar structure, lateral walls, and rounded corner treatments. The part is manufactured using an AUMING DMU400 five-axis machining center, employing a combined milling and grinding process. Each unit takes 25 minutes to produce, with the articular surface achieving a surface roughness of Ra < 0.6 μm. Additionally, the transition marks between milled and ground areas are kept below 0.025 mm.
Product Name:
Steering knuckle housing
Industry:
Automotive industry
Materials:
Aluminum alloy
Quality Level:
The AFMINGVMU6800 is a five-axis machining center developed specifically for the new energy sector. Featuring a five-axis positioning system and an extended Z-axis travel range, it enables single-machine processing of complex components. The workpiece concentricity can reach as high as 0.02 mm, while the surface roughness meets Ra ≤ 1.8 μm.
Product Name:
Steering knuckle
Industry:
Automotive industry
Materials:
6061 aluminum alloy
Quality Level:
This part is a typical automotive structural component. Its key machining features include hole systems, flat surfaces, and rounded corners. It is produced using the AFINGHGMU400 five-axis machining center, with a single-part processing time of 30 minutes. The surface roughness meets Ra ≤ 1.6 μm, and the hole system accuracy is better than ±0.008 mm.
Service Hotline 086-133 9270 9273
Official Account
TikTok account
Video Account
Message Online：
E-mail：
TEl：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Dongguan AFMING Numerical Control Equipment Technology Co., Ltd.
表单验证提示文本： The content cannot be empty!
循环体没有内容时： Hello, updating the information!
CSS / JS 文件放置地