-
-
-
-
-
Services and Support
-
Product Name:
Toy model
Industry:
Precision molds
Materials:
S136 Pre-hardened Material
Quality Level:
This mold is a toy mold, manufactured using multi-axis positioning machining from multiple angles. The dimensional accuracy is tightly controlled within 0.01mm, ensuring crisp, sharp corners. Additionally, the workpiece dimensions remain within ±0.013mm, with a surface roughness (Ra) of ≤1.2μm.
Product Name:
Car headlight mold
Industry:
Precision molds
Materials:
Mold steel
Quality Level:
This part is a headlight mold component, featuring fully contoured surfaces. It was manufactured using the AFS MING GMU800 five-axis machining center. After machining, the dimensional tolerance was tightly controlled within ±5 μm, with excellent consistency in tool marks across the surface and a surface roughness of Ra ≤ 0.3 μm.
Product Name:
Mercedes-Benz parts
Industry:
Mold Industry
Materials:
Mold steel
Quality Level:
The surface accuracy is ±0.006 mm, with a surface roughness of less than Ra0.8. The machined surfaces feature sharp, well-defined edges, while the transition planes exhibit no wire-drawing marks, and the corners remain free from vibration patterns—making this test piece an essential part of the quality check performed by major machine tool manufacturers before products leave the factory.
Product Name:
Hydraulic Control Valve
Industry:
Precision parts
Materials:
7075 Aluminum Alloy
Quality Level:
◆ Parts are machined in just 25 minutes; ◆ Key feature tolerances include: cylindrical accuracy of holes <3 μm, concentricity of stepped holes <10 μm, and perpendicularity between holes and surfaces <15 μm; ◆ The mass production process is consistently stable, achieving a product yield exceeding 99%.
Product Name:
Propeller
Industry:
Precision parts
Materials:
Aluminum alloy
Quality Level:
The blades have poor rigidity; when cutting forces are applied at the tip of the blade span, they easily undergo elastic deformation, often accompanied by vibrations. To address this issue, a method was adopted—injecting construction-grade adhesive between the blade passages—which effectively altered the damping characteristics of the component.
Product Name:
Turbocharger impeller
Industry:
Precision parts
Materials:
2618 Aluminum Alloy
Quality Level:
◆ Efficient roughing and finishing of all features in a single clamping operation; ◆ Single-piece machining time is 5 minutes, with uniform tool marks on curved surfaces and a surface roughness of Ra < 0.8 μm; ◆ The batch production process is consistently stable, achieving a product yield rate exceeding 99%.
Product Name:
Hydraulic pump parts
Industry:
Precision parts
Materials:
Aluminum alloy
Quality Level:
Precision-cast blanks place extremely high demands on the machining cycle, with hole machining cylindricity held within a tight tolerance of 0.002 mm.
Service Hotline 086-133 9270 9273
Official Account
TikTok account
Video Account
Message Online：
E-mail：
TEl：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Dongguan AFMING Numerical Control Equipment Technology Co., Ltd.
表单验证提示文本： The content cannot be empty!
循环体没有内容时： Hello, updating the information!
CSS / JS 文件放置地